What Causes Pipes to Burst?

What causes pipes to burst

How does a pipe burst? If you are asking, “What causes pipes to burst?” there are many different reasons why this often painful occurrence can occur, ranging from severe weather and structural changes to human physical trauma.

It is important to understand that no single cause can be blamed for the pipe bursting. However, there are common causes that come into play when pipes burst, and these are what causes them to burst in the first place.

Water is the most common component of plumbing systems. This is why it is imperative to inspect your pipes on a regular basis. Any leaks in the pipes should be promptly repaired, as these will pose a serious risk to the health and safety of everyone within the structure.

Water pressure is also a contributing factor. Any time a pipe or line has a low enough pressure level to cause a burst, it can put undue pressure on other systems as well as the water itself.

Hot water also poses a danger. Hot water is more corrosive than cold water and will result in damage that may not show up immediately. Over the course of a few minutes, this can lead to the walls cracking or the pipes bursting.

If the walls of the pipe do crack, cracks will open up throughout the entire pipe. As these cracks continue to spread, this is a threat to the entire structure. This is why it is imperative to check on these issues on a regular basis.

Water damage may also be caused by the expansion of water pressure. When a pipe experiences a sudden increase in its pressure, the surrounding walls will then swell, causing even more pressure to rise and cause the pipe to rupture.

Knowing what causes pipes to burst is the best way to prevent damage from occurring. By checking for leaks, inspecting your pipes for structural damage and addressing the issue at hand, you will be able to stop the damage from occurring to your home’s structure.

Pipes that have bursts before will require a different sort of solution. These pipes may need to be replaced or completely repaired. The longer the length of time the pipe has been leaking, the harder it will be to find the root of the problem.

In order to find the leak, it is important to look at the overall length of time the leak has been occurring. This will allow the homeowner to determine if the leak is a new occurrence. or if the leak has been around for some time. If a new leak has been found, it is important to repair it as soon as possible.

Once the location and length of the leak are known, it is important to find the reason for the issue. Sometimes plumbing systems may break down due to poor installation or a faulty valve. In these cases, fixing the pipe will simply mean replacing the part that has failed.

Old pipes will often be filled with material that has dissolved into the water. This material may have caused damage to both the walls and the water itself.

If a pipe has a burst because it was not installed properly, repairing it will involve draining out the old water and replacing the pipe with a new one. This will involve a lot of work and will require the expertise of a plumber.

While these may seem like an expensive project, replacing old pipes will only take some of the stress off of the homeowner. If any other areas of the house were affected, they can be addressed right away. Once the problem is dealt with, the homeowners will have a safe, comfortable place to live while their pipes are being fixed.